Welcome to Shanghai Paradise Seating Co., Ltd.!
yongleyongleyongleyongle
yongle 0086-13122682015yongle ylzy4288@aliyun.com

Check category

新闻中心

NEWS CENTER

>
>
>
How to choose the wood for the customized lecture hall seat manufacturers?

How to choose the wood for the customized lecture hall seat manufacturers?

How to choose the wood for the customized lecture hall seat manufacturers?

Information

When you choose customized lecture hall seat manufacturers, you may pay more attention to materials. The surface of customized lecture hall seat manufacturers is on the one hand, and the wood selection of seat structur customized lecture hall seat manufacturer is on the other hand. Do you know how to choose wood?

1. Wood material of customized lecture hall seat manufacturers: beech, oak, black walnut or Golden Teak can be selected by Party A.

2. The armrest, seat plate and back plate of the lecture hall should adopt a high-quality wood. The solid wood and solid wood laminate should be processed on the high-frequency medium hot press to ensure the stability of the product material. The wood is hard and the particles are small, which is conducive to improve the surface fine production and processing, and meets the requirements of China's green development and environmental protection management.

3. All solid wood and solid wood laminates shall be dried according to the standard under the condition of 90% humidity, the average moisture content shall be controlled within 12%, and anti fungal treatment and anti insect treatment (termite and bacteria) shall be carried out.

4. The wooden structural members of the customized lecture hall seat manufacturers can be connected by inlaid tongue and groove, and the edges and corners can be cut down.

5. Glue for customized lecture hall seat manufacturers: solid wood and woodworking shall be bonded with vinyl glue, and solid wood laminate shall be bonded with urea formaldehyde glue and formaldehyde. The heat seal strengthens the hardness, and the formaldehyde content meets the requirements of green environmental protection.

6. The surface of the customized lecture hall seat manufacturers shall be polished carefully and the finish shall not be lower than the current three-layer finish, and the finish shall not meet the requirements.

7. Color of customized lecture hall seat : the specific color of seat back plate and fabric will be produced according to the color card and sample determined by the design after 

Keyword:

Scan the QR code to read on your phone

永乐座椅
37
37 years of industry experience
30+
Product sold to more than 30 countries and regions
96000
Customer service
150+
Workers
Contact
地址Address:4288 Hutai Road, Shanghai
Follow us
Scan code attention to the public number
Follow us
Follow us
Follow us
地图名片
 

CopyRight © 2019 Shanghai Yongle Seating Co., Ltd. All Rights Reserved   沪ICP备12032329号  BY:www.300.cn