In daily life, many people will take watching movies as a way of entertainment. I don't know if you find customized Auditorium chair used in the cinema when you watch the movie. When people leave, they will automatically turn to the vertical position. There is a big passage between the line and the line for people to walk.

In fact, in addition to cinemas, the customized Auditorium chair in many places have this feature. So, when the customized Auditorium chair is used, because the process of starting a person has been going on, if it is not fixed properly, it is very easy to cause problems.

The flip customized Auditorium chair is generally provided with fixed shafts between the legs, and bearing seats corresponding to the fixed shafts are provided on both sides of the bottom of the support. The customized Auditorium chair can rotate around the axis. Here we need to note that the method of fixing the customized Auditorium chair on different floors is different.

There are five main ways to fix the customized Auditorium chair in the auditorium on different boards:

1. Cement floor

When the customized Auditorium chair is fixed on the cement floor, the hole can be opened directly with the impact drill, and the expansion bolt can be embedded in advance.

2. Tiles and marble

When the customized Auditorium chair is fixed on the tile and marble floor, it can be drilled into the cement floor with glass, and then the hole can be opened with an impact drill, and the expansion bolt can be embedded in advance.

3. Wood floor

When the customized Auditorium chair is used on the wooden floor, we can use the wooden drill to drill holes, and the impact drill holes can be embedded with expansion bolts in advance.

4. Steel frame and steel plate

If the customized Auditorium chair needs to be installed on a steel frame or steel plate, it should first drill a 3-4mm hole with an electric drill, and then directly install a special tapping screw. The base plate can be directly fixed with a 30-40mm special tapping screw.

5. There are lines and pipes under the room

Another situation is that there are lines and pipes under some rooms, which means there is no way to open the hole to fix the customized Auditorium chair. However, you don't have to worry. We can use a tripod to solve the problem. The specific method is to lengthen the leg and move the tripod.

In addition to being fixed, customized Auditorium chair are often used in theatres, cinemas, conference halls and other places, and the requirements for leather are relatively high. Generally, the customized Auditorium chair is made of leather surface, which must be treated with ultraviolet protection, heat resistance, light resistance and wear resistance to increase its service life.