How to maintain Cinema seat in china?1. Close the bottom edge to the seat so that it looks like a china.2. Put another piece of paper under the bottom edge of the seat to make sure the whole is intact.3. Take the glue stick and make sure that it rests in the hole. This way it will not show as the glue sticks up when you remove the seat.4. When you remove the seat (after glue dries) the seat will fall off the side that has the glue stick.5. You want to make sure that the glue is still not showing. If it shows after the glue is dried then you can see the glue is still there.6. Put a plastic sheet under the seat as a cushion. This will keep the glue from getting stuck. Then you can take the glue, put it under the seat and remove it.

How to clean the Cinema seat in china if it is dirty?1. Unzip the seat to the seat cushion2. Put the air-hole out of the way3. Take a very gentle cloth to the seat cushion and gently remove the white dust particles.4. Spray cleaning agent all over the seat. This can include rubbing alcohol and/or a vinegar based cleaner. Avoid using anything such as perfume or lotion5. Let it air dry. You want to dry the seat as early as possible and this can take a couple of hours. The seat should become dry after 5 hours if it has been used for more than half an hour. If it is dry after half an hour then try to re-cushion it. The cloth should be used only once! Remember! Don't use chemical cleaning products, detergents or detergents containing any sort of bleach.