Auditorium chair in china are of high quality, good value for money, firm and reliable. Most of the Auditorium chair in china are composed of chair seats, seats, guardrails and standing feet. Generally speaking, standing feet and guardrails are combined to form a solid guardrail frame. The structure is generally steel-wood structure or steel-plastic pipe structure. For pure wood furniture, pay attention to the water content not exceeding 12%. Choose mortise and tenon structure instead of nail gun. Auditorium chair in china needs to be square, diagonal consistent, vertical and stable, the hardware prefabricated components should be firm, and the door and drawer cabinet should be flexible to open. The surface of leather products and office furniture should be flat, free of bubbles, cracks and orderly joints.

The gravity recovery mechanism of Auditorium chair in china is a design device installed on both sides of the seat cushion and armrest, which can make the seat cushion of Auditorium chair in china automatically turn over when it is not in use, and will not make any annoying noise when it is opened and responded. It is soft, elegant and firm, and is a built-in device, which does not affect the appearance of the seat. Gravity recovery mechanism can also be called spring recovery mechanism. The design of gravity recovery mechanism is simple and reliable, without maintenance. Rubber muffling pads are often equipped to clean up the impact and noise during response. In addition, the slow rebound device can control the response motion, and the rotation speed is uniform.

According to strict management and maintenance of damaged equipment, as well as the selection of appropriate  Auditorium chair in china according to customers, the loss rate can be reduced to a lower level. Naturally, it is mainly the Auditorium chair in china selected for adults, which is very different from the Auditorium chair in china selected for young people. However, for conference halls with obvious problems, the following specifications and models of Auditorium chair in china are selected to reduce damage:

1. Steel plate or high hard rubber structure is selected as the material structure to withstand the damage caused by impact, cutting or scratch. The aluminum plate edging can further maintain the upper edge of the seat.

2. In order to avoid damage to the guardrail of the decorative chair, wood or plastic guardrail shall be used.

3. Cast iron or other materials with compressive strength shall be used to withstand normal pressure and rough action.

4.Pay attention to the selection of decorative fabrics. Long-term use and solid materials are important, but they also need to be conducive to cleaning. Textures with patterns are conducive to recovery. Compared with ordinary plain textiles, patching is not so obvious. Avoid using loose textiles because it is easy to lose hair.

5.Fully consider that the plastic polyurethane foam seat cushion is made of mold and can be firmly attached to the torsion spring. Therefore, this kind of Auditorium chair in china can reduce the damage caused by audience wriggle, and it is more comfortable to sit inside than ordinary movie seats.

6. When selecting a self-folding Auditorium chair in china, the key is to keep the hinge in a position that is not easy to take out.